Saturday, November 30, 2013

A walk into the future?

Yesterday we moved down to the end of the navigation, at Gronwyn Wharf, where we turned around and retraced our route to Maesbury Marsh.

We didn’t get going till mid afternoon, it was blowing a hooley in the morning but had eased a bit after lunch.

The approach to Park Mill Bridge is almost obscured by reedsSAM_7309

Beyond the bridge the canal is narrow, shallow and clogged with autumn leaves, making progress slow with frequent “chucking back” to clear the prop.

The odd blown down tree didn’t help, either.
SAM_7311
Hmm, might have that on the way back….

Maesbury Marsh sits alongside the canal, and developed to take advantage of it. There’s the chimney of a redundant bone meal and glue factory, and the Navigation Inn was originally canal-side warehousing/

Approaching Maesbury MarshSAM_7312

SAM_7316
There’s a lift bridge which replaced the lowered canal bridge next to the Mill Arm. We had to do this twice, there’s no mooring opportunities between here and Gronwyn Bridge, the current end of the navigation.

Croft Mill Bridge

Oddly, the Mill Arm just alongside the bridge went to Peate’s Mill. I wonder what happened to Croft Mill.

We turned around at Gronwyn Wharf, and returned to moor up near Canal Central, the shop/tea room/B&B near Spiggot’s Bridge.SAM_7317

And yes, unless anyone else has come down Frankton Locks since we left Weston on Thursday, we are the only visiting boat down here at the moment!

This morning, bright but chilly, Meg and I set off to inspect the work in progress beyond Gronwyn Bridge.

Croft Mill Bridge…SAM_7320

…and the Mill Arm, now used for moorings
SAM_7321

Gronwyn Bridge, end of the line for now.SAM_7323

The canal is in water from here to Redwith Bridge, but there’s no winding hole to turn around so it’s not open for navigation yet.

There’s a new lift bridge for farm access before Redwith BridgeSAM_7326

I wonder how low it’ll be before visiting boats break the placid surface?SAM_7348

Redwith bridge had to be rebuilt to allow headroom for boats, it had been lowered for safety while the canal was derelict. There’s an earth dam at the bridge keeping the water out of the next section.
SAM_7327


SAM_7328

There’s a ¼ mile stretch now that’s been lined with a waterproof membrane, then paved with concrete blocks for protection. The profile is saucer-shaped, much as it would have been originally.SAM_7332

SAM_7331











….Since 1968. Lots more info on the website

SAM_7334At Pryles Bridge the channel, although lined in the past, has become overgrown with reeds and grasses.










Standing in the canal bed.
SAM_7335
Overnight frost still lingers in the shade.

This afternoon we had a short walk up the Mill Arm, round to the old millpond.

Moorings on the arm….
SAM_7355

….and in the basin at the endSAM_7360

SAM_7358
The millpond

The mill was originally water-powered, using water diverted from the Morda Brook. This same water is now used as a feeder for the canal.







The sun was setting as we walked back to the boat.SAM_7361

SAM_7365
I’d had a quick chat with a local chap yesterday, as I walked the dog. I wanted to know if there was anywhere local to get a paper this morning.
Turns out that the nearest place is in Knockin, about 2½ miles away. I was prepared to get John Sage off his rack and cycle over there, but there was a knock on the side of the boat at half past nine, Rick (the local chap) offering me a lift to the shop. What a fine gesture.
More so because I suspect he made a special trip for me. He claimed the shop didn’t have what he wanted…

Did I say the shop is in Knockin? Understandably it’s called The Knockin Shop.Winking smile

Not sure if we’re moving on the return journey tomorrow, or staying another day. I failed to find St. Winifred’s Well yesterday, I might try again in the morning. I’ve got a better idea of it’s location now.

Locks 0, miles 1½

No comments: